field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

NOW HIRING: Tool &amp; Die Makers Universal Metal Products specializes in custom metal forming, serving customers globally in the appliance, transportation, and industrial markets for over 75 years.We are strategically located in three US locations with over 100 forming machines. We provide tooling design, value-added assembly, heat treat and finishing operations. We have an immediate need for Tool &amp; Die Makers in our Pharr, TX facility. Position Responsibilities: •Build/repair all types, sizes, and shapes of jigs, fixtures, tools and dies.•Assemble and try out complex tools and dies on manufacturing equipment. •Plan and perform bench and machine operations. •Sets up, runs off, and tests dies to produce a product to spec, tracing die difficulties to their source and correcting them. •May assist in the training/mentoring of apprentices. •May work with tool designers providing input to manufacturing capability on newly formed parts.
Qualifications •Experience with prog dies in a metal stamping environment (at least 3-5 years) •Must have documented, formal apprenticeship completion or equivalent outside work experience.•Strong math and mechanical aptitude. •Requires a high degree of precision and control in work •High degree of attention and care required.•Ability to read/interpret blueprints, schematics, etc.
Please 
email your resume to: <a href="mailto:lespinoza@ump-inc.com" target="_blank">lespinoza@ump-inc.com</a> or visit us: Universal Metal Products, Inc. 101 West Eldora Rd., Pharr, TX 78577

TOOL & DIE MAKERS

American Turbine is a world renown manufacturer of Jet Drives, our product is sold worldwide. American Turbine will celebrate its 34th anniversary in February.  American Turbine understands the value of stability and sustainability. If you are looking for consistent, reliable, work please call or come by for an application. We are hiring skilled and non-skilled production labor professionals. WE WILL TRAIN you!
Hourly salary range: $16 – 19.00/hr*
*Wages are DOE, subject to a variety of factors including but not limited to: prior relevant experience, skilled experience and/or certifications in specific areas of skilled manufacturing.
You must be at least 18 years of age to apply for this position and be able to perform the following essential tasks continuously, for an 8-hour shift.
<ul><li>Stand at workstation for entire shift</li>
<li>Hold 20LB casting against grinding belt without support</li>
<li>Lift up to 50LBS</li>
</ul>Benefits (eligibility period applies):
<ul><li>Health</li>
<li>Dental</li>
<li>Vision</li>
<li>PTO accrual / Paid Sick leave</li>
<li>6 - Paid holidays</li>
<li>401K profit sharing plan</li>
</ul>American Turbine
3692 Riverside Dr.
Clarkston, WA. 99403
509-243-5387  ask for Ron Gordon

Impeller specialist / machine operator

Skilled Tool &amp; Die Maker Full Time Falconer NY
Minimum 2 years experience For more information please call Bob at 716-665-2801 provided by The Jamestown Post-Journal

Skilled Tool & Die Maker

Envelope Machine Adjuster Start Immediately Experienced on FL SMITHE RA Blank &amp; Web Machine 1st &amp; 2nd Shift Benefits Relocation Expenses Highest Hourly Rates in the Industry Email: <a href="mailto:terry@neecopa.com" target="_blank">terry@neecopa.com</a> Located in Old Forge, PA 18518 (Just Outside Scranton, PA)  Northeastern Envelope Company

Envelope Machine Adjuster

Please join us for Vanguard Renewables Job Fair on January 25, 2023 from 1pm-5pm. Bring your resume and a valid ID with you for on the spot interviews with HR and Management!
Open Positions:
<ul><li>Organic Recycling Facility Operator</li>
<li>Biogas Technician</li>
<li>Biogas Operator</li>
</ul>Full job descriptions can be found at <a href="https://www.vanguardrenewables.com/careers/" target="_blank">https://www.vanguardrenewables.com/careers/</a>
Registration is recommended but not required. Please email us at <a href="mailto:careers@vanguardrenewables.com" target="_blank">careers@vanguardrenewables.com</a> with your resume and position that you will be applying.
Job Fair Address: 299 Main Street Agawam, MA 01001
When you arrive, follow signage for parking instructions. We look forward to seeing you there!
Job Type: Full-time

Job Fair (3 Positions)

Microspec Medical Extrusions Now Hiring !  New Year's Special: 2nd &amp; 3rd Shift Openings Sign-on Bonuses: Secondary Manufacturing: $2500 QC Inspector: $3000 Operator: $3500 Extrusion Technician: $4000  Off-shift differentials: 2nd shift - 15% base salary 3rd shift - 20% base salary  1st shift: 6:30am - 3:00pm M-F 2nd shift: 1:30pm - 10pm M-F 3rd shift: 4-day work week - 7pm-5:30am M-Th Benefits include: 401K, Paid Vacation, PTO, Comprehensive Health Insurance  Voted by Business NH Magazine as one of NH's Top Family-Owned Businesses in 2021 &amp; 2022!  Apply now on our website career page: <a href="http://www.microspecorporation.com" target="_blank">www.microspecorporation.com</a> or Indeed.com  Microspec Corporation 327 Jaffrey Rd. Peterborough, NH 603-924-4300 Microspec is an Equal Opportunity Employer

Secondary Manufacturing Position - Multiple Positions

Overview 
Crane Currency, a subsidiary of Crane Co. (NYSE:CR), is a global leader and an innovative force in substrate, print and technology.  As the largest banknote substrate-maker in the world, Crane’s spirit of innovation and product development has won international acclaim.
The Company is a fully integrated supplier of banknotes for more than 50 central banks from all over the world and has $500 million in annual sales. A global company with a history of over 200 years in the U.S. and Sweden; with more than 1,200 employees the business continues to grow through organic expansion, acquisitions and joint ventures with strategic partners. The newest banknote facility opened in 2017 in Malta.
Crane Currency is a stand-alone business within the Payment &amp; Merchandising Technologies segment of Crane Co. It is headquartered in Dalton, Massachusetts with operations in Nashua, New Hampshire; Alpharetta, Georgia; Tumba, Sweden and Hal Far, Malta.
Teamwork is Currency at Crane 
We're looking for a Sheeter Helper Grade 2 to join our Finishing department in Dalton, MA. In this position, you will play a critical role with an exciting organization known for innovative currency and banknote technology. Sheeter Helpers are responsible for inspecting, notching, counting, stacking, scanning and wrapping paper which comes off the Sheeters in the Finishing Department.  This is a rotating shift, entry-level position in the Finishing line of progression.
KEY RESPONSIBILITIES: 
<ul><li>Visually inspect paper for defects and remove paper which does not meet quality standards</li>
<li>Square reams of inspected paper</li>
<li>Inspect random sheets on light box</li>
<li>Notch reams of paper</li>
<li>Operate Counting Machine and Scanning Machine</li>
<li>Ensure accurate quantity of paper in each ream by adding/removing paper as needed for each ream</li>
<li>Prepare samples from each skid, correctly labeling each</li>
<li>Take relative humidity readings for each skid and accurately record results</li>
<li>Ensure accurate ream count for each skid</li>
<li>Wrap and label each skid and move full skids from stacking station to wrapping area</li>
<li>Properly label and move baled broke from baler and skid broke to designated area</li>
<li>Use the SMART System for ream tracking</li>
<li>Operate power truck/hand truck</li>
<li>Assist with roll changes and removing jammed paper from the Sheeter</li>
<li>Assist with routine machine cleaning and general housekeeping</li>
</ul>Crane offers pay starting at $23.93/hour, with generous shift differentials including 7.5% for 2 nd  shift and 10% for 3 rd  shift workers.  Our company is a fast-paced, global business with tight deadlines and high expectations for superior quality products. Don’t miss out, apply now! 
<ul><li>High School diploma or equivalentIndustrial experience, preferred</li>
<li>Possess basic mathematical skills and computer knowledge</li>
<li>Must have proven ability to work as part of a team</li>
<li>Willing and able to pass a Power Truck Certification class</li>
<li>Ability to read, write, keep neat and accurate records, and follow written and verbal instructions</li>
<li>Ability to understand and follow operating/job procedures and work in a safe manner</li>
<li>Willing to train new members of the department</li>
<li>Must be able to work any shift arrangement and overtime as needed</li>
<li>Must be willing and able to understand the quality requirements of Crane &amp; Co., Inc.’s products, and his/her role in ensuring this quality</li>
</ul>The person selected for this position will need to demonstrate suitability for employment in a position of Public Trust consistent with our US Government contract requirements.
SUITABILITY AND BACKGROUND INVESTIGATION REQUIREMENTS:  The final offer of employment will be subject to the applicant's successful completion of a background investigation and favorable adjudication. Failure to successfully meet these requirements will be grounds for disqualification in the hiring process. The background investigation process conducted by Crane and our U.S. Government Agency customers is very thorough. Therefore it is imperative that applicants exercise candor and honesty when answering background questionnaires, especially as it relates to arrest, employment, education, finances, illegal drug use, and/or other criminal history. Falsification discovered in security documents or during the background investigation process may result in an immediate negative suitability determination.
Crane offers a competitive benefits package to full-time employees, including health, dental, vision, and life insurance, a 401k match and more. Qualified candidates are invited to apply via our careers page.  Crane is a drug free workplace.
Crane Currency is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, disability, military status, or national origin or any other characteristic protected under applicable federal, state, or local law.

Sheeter Helper

Spartan Light Metal Products Hannibal MO Facility Spartan Light Metal Products is a recognized industry leader in the manufacturing and delivery of engineered Aluminum die casting solutions. We are seeking a highly motivated/skilled individual for: Tool Room Machinist (Tool Maker)-3rd Shift Requirements: -Ability to review and understand engineering drawings, customer provided part drawings, manuals, specifications, or sample parts. -Solid experience in operating a variety of manual and CNC controlled machinery -Knowledge of die casting and inspection. -3+ years Tool Room experience -High School Diploma/GED -Degree and/or Certificate in Machine Shop Technology or a Certification/Degree in a related field preferred. We offer a competitive compensation/benefits package and the opportunity to work in a value-driven organization where employees are considered our most valuable resource. Please apply online at <a href="http://www.workatspartan.com" target="_blank">www.workatspartan.com</a> or mail your resume to: Human Resource Department Spartan Light Metal Products 4649 Route MM Hannibal, MO 63401 We are proud to be a Drug-Free and Equal Opportunity Employer

Tool Room Machinist (Tool Maker)

Now Hiring !  Microspec Medical Extrusions New Year's Special: 2nd &amp; 3rd Shift Openings Sign-on Bonuses: Secondary Manufacturing: $2500 QC Inspector: $3000 Operator: $3500 Extrusion Technician: $4000  Off-shift differentials: 2nd shift - 15% base salary 3rd shift - 20% base salary  1st shift: 6:30am - 3:00pm M-F 2nd shift: 1:30pm - 10pm M-F 3rd shift: 4-day work week - 7pm-5:30am M-Th Benefits include:401K, Paid Vacation, PTO, Comprehensive Health Insurance  Voted by Business NH Magazine as one of NH's Top Family-Owned Businesses in 2021 &amp; 2022!  Apply now on our website career page: <a href="http://www.microspecorporation.com" target="_blank">www.microspecorporation.com</a> or Indeed.com  Microspec Corporation 327 Jaffrey Rd. Peterborough, NH 603-924-4300 Microspec is an Equal Opportunity Employer

Aspiring Construction Professional? Carpenter or Laborer Seeking Steady Indoor Work? Looking for a job with a future?
We are a leading provider of engineered wood framing components. Our customers include New England’s most forward-thinking commercial &amp; residential builders.
You will be a member of a team that fabricates wood wall frame panels and trusses in our Danbury NH and Pembroke NH locations. Experience or will train.
Day or evening shifts, good pay, overtime, paid time off, bonuses and good fringe benefits. Tuition assistance program for those interested to learn construction trade skills, construction design skills &amp; construction project management skills.
Email us <a href="mailto:smahoney@wallacebp.com" target="_blank">smahoney@wallacebp.com</a> or Call (603) 768 5900 and ask for Gayle.

10 Manufacturing Jobs in United States